location_pin Get Directions
22644 Hwy. 17 E., P.O. Box 138, Iron Bridge, ON P0R 1H0
ID # 26623012

WESTERN® MVP 3™ V-PLOW

Videos
Call for Price
Overview

STRENGTH COMES FROM RELIABILITY

The rugged MVP 3™ v-plow gives you all the power, productivity and performance you need for commercial snowplowing. With extreme flared wings, up to 45″ on the heavy-duty 10′ 6″ model, and double-acting cylinders, the MVP 3 v-plow has earned its reputation as a reliable plow by consistently delivering on what matters most—getting more jobs done faster.

Specifications
Model
MVP 3™ V-Plow
Year
2022
Sale Type
New
Manufacturer
Western
unique features

WESTERN® MVP 3™ V PLOW PLOW BLADE CONSTRUCTION

The MVP 3™ flared v-plow blades soar from a 35" center height up to a full 45" at the outer edge on heavy-duty 10' 6" models.

The MVP 3 v-plow is available in 14-gauge powder coated, stainless steel, and 1/4" high-density polyethylene in 8' 6" and 9' 6" widths. 10' 6" models are available in 11-gauge powder-coated steel and 12-gauge stainless steel options.

All MVP 3 models feature a clean-scraping 70-degree attack angle, and come with a standard 6" high-carbon steel cutting edge to reduce wear and extend the life of the blade.

WESTERN® MVP 3™ V PLOW Structural Reinforcement

Eight vertical ribs on 8' 6", 9' 6" and 10' 6" models, combined with the exclusive WESTERN® POWER BAR, provide exceptional torsional strength and rigidity to eliminate blade twisting. The high-strength steel base channel provides extra support along the bottom of the plow blade.

A 1¼"-diameter, heat-treated steel center pin resides within a three-connection-point hinge, keeping the wings tight for optimal performance.

RELIABLE HYDRAULICS

We manufacture our own hydraulic components to ensure the highest standards of quality and reliability, so that you get a hydraulics system that's not only fast and responsive, but that's built to last season after season.

Fully enclosed components are protected from the elements.

Trip Protection

Each blade features independent trip-edge design with heavy-duty coil springs for protection when encountering bumps and obstacles. Whether in V, scoop, or straight blade configuration, the trip edge helps protect the plow, the truck, and the operator. Since only the edge trips, snow remains in front of the blade, so you can keep going without spilling the entire load of snow.

WESTERN® MVP 3™ V PLOW Double-Acting Cylinders

As a standard feature on the MVP 3™, UltraLock double-acting cylinders allow the operator to use the v-plow in straight blade mode by locking the wings together instead of having to toggle each wing independently.

The double-acting cylinders also hold the wings firmly in place for clean, efficient back dragging.

WESTERN® MVP 3™ V PLOW Steel Center Gap Cover

For the cleanest pass in any position, the MVP 3™ v-plow has a snow control deflector over the center hinge to help prevent snow from being lost over the top.

WESTERN® MVP 3™ V PLOW 10' 6" Heavy-duty Features

10' 6" MVP 3™ v-plow models come standard with specific heavy-duty features.

Blade Construction: Thicker moldboards and a more robust base angle with additional hinge points.

Heavy-Duty T-Frame: Features a solid, one piece construction, from front to back, and an oscillating pivot bar.

Standard Blade Angle Stops: Designed to transfer extreme impacts throughout the blade's structure and reduce stress on the hydraulic rams.

Standard Curb Guards: Constructed of abrasion-resistant material and designed to fit tight to the blade, these curb guards protect the outer edge of the plow from wear when plowing along sidewalks and curbs.

WESTERN® MVP 3™ V PLOW Tractor Compatible Mount Kit

Designed for easy installation onto a wide range of tractor models, these mount kits make it possible for the MVP 3 v-plows to fit on a compact tractor. They are flared both vertically and horizontally to ensure proper alignment and make the drive-in connection easier. The push beam, which makes up the front portion of the mount, can be quickly detached to allow for a loader attachment.

universal features

WESTERN® MVP 3™ V PLOW NIGHTHAWK™ Snow Plow Headlights

Available in both LED and Dual-Halogen models, NIGHTHAWK™ plow lights are engineered and tested for maximum light output, performance and durability to keep you ahead of the storm.

WESTERN® MVP 3™ V PLOW PLOW CONTROL OPTIONS

Choose between a CabCommand hand-held control with push buttons or a joystick control, based on operator preference. For efficient, precise and intuitive blade control while plowing, both controls feature power “on” and “float” LED lights, backlighting for night operation, and plug-in connector for easy removal.

WESTERN® MVP 3™ V PLOW SECURITY GUARD™ ANTI-THEFT SYSTEM

The exclusive WESTERN® SECURITY GUARD™ snow plow anti-theft system is a safe and secure way to electronically lock your snow plow when it is detached from your truck. Unlike physical locks that can easily be cut or removed, the system provides a deterrent against theft by allowing you to electronically lock the snow plow's hydraulic functions, rendering your plow inoperable to unauthorized users.

WESTERN® MVP 3™ V PLOW ULTRAFINISH™ BAKED-ON POWDER COAT

The ULTRAFINISH™ baked on powder coat with epoxy primer is standard on all WESTERN® plows, providing outstanding protection against wear and rust. Each WESTERN plow goes through an automated eight-wheel shot blaster pre-treatment process and multi-stage pre-wash to prepare the plow surface for optimum coating adhesion.

After that a durable epoxy primer is applied to improve corrosion resistance and enhance powder coat adhesion. The powder coat is then applied with robotic guns that ensure precise, consistent powder coat coverage. The final baking process seals the long-lasting hard-as-nails WESTERN red coat. The result is a state-of-the-industry finish that will provide superior protection for your plow, season after season.

WESTERN® MVP 3™ V PLOW Isolation Module

This advanced snow plow light and electrical system features improved electrical pins in the harness for trouble-free connections. An underhood module improves system life and complies with OEM requirements. No toggle switch needed to change from vehicle to plow lights.

WESTERN® MVP 3™ V PLOW UltraMount® 2 SNOWPLOW MOUNTING SYSTEM

The UltraMount® 2 system is designed for fast and easy installation and removal using a simple mechanical system. It features a robust one-piece design and is 100% compatible with UltraMount® system mounts and electrical platforms.
 

 

https://westernplows.com/wp-content/uploads/2021/05/chain-lift.jpg CHAIN LIFT SYSTEM

The mechanical chain lift system offers a variety of performance and reliability advantages over a hydraulic system.

https://westernplows.com/wp-content/uploads/2020/07/fleetflex.jpg FLEET FLEX ELECTRICAL SYSTEM

The FLEET FLEX electrical system provides true fleet interchangeability. The same FLEET FLEX CabCommand hand-held or joystick control can operate any UltraMount® and UltraMount® 2 mounted plow on any truck at any time.

WESTERN® MVP 3™ V PLOW Pre-Punched Blades for Accessories

The blade is pre-punched for easy installation of accessories, providing a custom fit. The pre-punched holes also prevent damage to the powder coat that can sometimes occur when installing an accessory.

featured accessories

WESTERN® MVP 3™ V PLOW BACK DRAG EDGE

Ensure a clean scrape every time, when you back drag. The WESTERN back drag edge is built to be as rugged and durable as every other component of your plow. Constructed of 0.25" abrasion-resistant steel and angled to maximize back dragging performance. This easy to install back drag edge is a key tool in any snowfighter's kit.

*MVP 3™ cannot use shoe kit and back drag edges simultaneously.

WESTERN® MVP 3™ V PLOW CURB GUARDS

Go right up to the edge with bolt-on curb guards. Protect the outer edge of your MVP 3™ snow plow from wear when plowing along sidewalks and curbs. Made of cast metal, each curb guard effectively protects the outer edge of the plow.

*Curb Guards cannot be used simultaneously with Wing Extension Kits.

WESTERN® MVP 3™ V PLOW CONVERSION KIT

This easy-to-use UltraMount® to UniMount® conversion kit enables you to attach a UniMount plow to a vehicle equipped with an UltraMount System vehicle mount. This kit is perfect if you have multiple snow plows, providing your fleet with versatility while changing to the UltraMount System. It is also ideal when transferring an old UniMount plow to a late model vehicle. When you are ready to replace the UniMount plow, the truck will already be equipped with the mount and wiring for any UltraMount® or UltraMount® 2 plow. Designed for use with all Standard, PRO, and 8' 6" MVP® UniMount plows. Not compatible with Sport Utility or Heavyweight models.

specifications
Models    8'6"    9'6"    10'6"
Moldboard Options Steel/Stainless/Poly Steel/Stainless/Poly Steel/Stainless
Blade Width  8'6" 9'6" 10'6"
Blade Height At Center: 31"
At End: 38"
At Center: 31"
At End: 39"
At Center: 35"
At End: 45"
Blade Thickness Steel: 14 ga
Poly: 0.25"
Steel: 14 ga
Poly: 0.25"
Steel: 11 ga
Stainless: 12 ga
Trip Springs 4 6 6
Ribs 8 8 8
Lift Cylinder 1.75" x 8" 1.75" x 8" 1.75" x 8"
Angling Rams 1.75" x 11" 1.75" x 11" 2" x 11"
Plowing Width
(Full Angle)
Full Angle: 7'5"
Scoop: 7'2"
Full V: 7'8"
Full Angle: 8'6"
Scoop: 8'2"
Full V: 8'7"
Full Angle: 9'9"
Scoop: 9'7"
Full V: 9'11"
Approx. Weight
(Without Mount)
Steel: 940 lb
Poly: 890 lb
Steel: 1,022 lb
Poly: 972 lb
1,196 lb
Cutting Edge 0.375" x 6"
0.5" x 6" (Optional)
0.5" x 6" 0.5" x 6"
Mount Type UltraMount® 2 UltraMount® 2 UltraMount® 2

 

 
Videos Documents